Pipeline electric heater Introduction to heating mode
Many friends know Pipe heater However, it is not clear about its heating mode. The pipeline heater can be divided into the following modes:
1. Using pipes Electric heater The internal flange type tubular electric heating element is inserted upside down in the reactor jacket in the pipeline electric heater to heat the heat transfer oil and transfer the heat energy in the pipeline heater to the chemical raw materials in the reactor inside the pipeline heater.
2. The tubular electric heating element in the pipe heater is inserted into the reactor directly in the pipeline electric heater, or the electric heating pipe is evenly distributed around the wall of the pipe heater. This mode becomes the internal heating mode of pipeline heater. The internal heating type of the pipeline heater has the advantages of fast temperature rising and high efficiency. 3. Far infrared electric heating device. The electric heater in the pipeline heater is used to wrap the bottom of the reactor and the middle and lower parts of the pipeline heater for heating. Pipeline heater is mainly used for heating asphalt, heavy oil, clean oil and other materials in advance. It belongs to an energy-saving equipment. It is mainly installed before the equipment, which can better realize the heating of materials, but can not be used in long-term water and cold areas. Due to the different heating environment, material and shape, the temperature of pipeline heater will be different. If you need to purchase pipeline heater, please call us.